Section 1: Identification of Substance and Company Identification
1.1 Product identifier
Product Name
1.2 Relevant identified uses of the substance or mixture and uses advised against
Identified Use(s)
Uses Advised Against
1.3 Details of the supplier of the safety data sheet
Manufacturer:
Company Identification
Address of Manufacturer
Telephone
E-mail
Office hours
1.4 Emergency telephone number
Emergency Phone No.
Contact
BIOLOGIC™ SR2
To remove objectionable odors at the source. Apply to landfill working face, finished cover, compost, roadways, biosolids, sludge, wastewater or any other odor causing material.
Not known
SciCorp International Corp.
3300 Ridgeway Drive, Unit 13
(905) 829-1749, 1-800-897-2053
8:00 am to 5:00 pm ET (Monday - Friday)
1-905-829-1749 (Canada) 8:00am to 5:00pm ET (Monday - Friday)
Company
Section 2: Hazards Identification
2.1 Classification of the substance or mixture Regulation (EC) No. 1272/2008 (CLP) Not classified as hazardous for supply 2.2 Label elements According to Regulation (EC) No. 1272/2008 (CLP) Product Name BIOLOGIC™ SR2 Hazard Pictogram(s) None Signal Word(s) None Hazard Statement(s) None Precautionary Statement(s) None 2.3 Other hazards
May cause eye irritation if concentrated solution is applied directly to eye 2.4 Additional Information
None
Section 3: Composition and Information on Ingredients
3.1 Substances Not applicable
3.2 Mixtures
HAZARDOUS INGREDIENT(S)
CAS No.
EC No. / REACH Registration No.
%W/W
Hazard Statement(s)
Hazard Pictogram(s)
Zinc
7440-66-6
231-175-3 01-2119459210-49-XXXX
>0.5 - <1
Not classified
None
Manganese
7439-96-5
231-105-1 01-2119449803-34-XXXX
>0.5 - <1
Not classified
None
Copper
7440-50-8
231-159-6 01-2119480154-42-XXXX
>0.1 - <0.3
Not classified
None
Contains no non-classified vPvB substances. Contains a non-classified substance with a Union workplace exposure limit. Copper fume (as Cu) (7440-50-8) Manganese and its inorganic compounds (as Mn) - Inhalable fraction (7439-96-5) For full text of H/P Statements see section 16.
Section 4: First Aid Measures
4.1 Description of first aid measures Inhalation If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing. Skin Contact Wash skin with soap and water. Eye Contact Flush eyes with water for at least 15 minutes. If symptoms persist, obtain medical attention. Ingestion Rinse mouth. Seek medical advice if necessary. 4.2 Most important symptoms and effects, both acute and delayed Ingestion: May cause headache, nausea and vomiting. Eye contact: May cause redness. 4.3 Indication of any immediate medical attention and special treatment needed Unlikely to be required but, if necessary, treat symptomatically.
Section 5: Fire-Fighting Measures
5.1 Extinguishing media Suitable Extinguishing media As appropriate for surrounding fire Unsuitable extinguishing media None 5.2 Special hazards arising from the substance or mixture None anticipated 5.3 Advice for firefighters Fire fighters should wear complete protective clothing including self-contained breathing apparatus.
Section 6: Accidental Release Measures
6.1 Personal precautions, protective equipment and emergency procedures Provide adequate ventilation. Wear suitable gloves if prolonged skin contact is likely. 6.2 Environmental precautions Do not allow high volumes (bulk amounts) of concentrated product to be spilled into drains, sewers, or water courses due to potential harm to aquatic organisms. When product is used/dosed as intended, testing has shown there is no risk to aquatic organisms. 6.3 Methods and material for containment and cleaning up Adsorb concentrated spillages onto sand, earth or any suitable adsorbent material. Flush spill area with copious amounts of water. When product is used/dosed as intended, testing has shown there is no risk to organisms. 6.4 Reference to other sections See Also Section 8, 13.
Section 7: Handling and Storage
7.1 Precautions for safe handling
Provide adequate ventilation. Wear suitable gloves if prolonged skin contact is likely. Wash hands and exposed skin thoroughly after handling 7.2 Conditions for safe storage, including any incompatibilities:
Keep in a cool, dry, well-ventilated place. Do not freeze. Storage temperature Ambient. Storage life Stable under normal conditions. Incompatible materials Strongly alkaline. 7.3 Specific end use(s)
To remove objectionable odors at the source. Apply to landfill working face, finished cover, compost, roadways, biosolids, sludge, wastewater or any other odor causing material
Section 8: Exposure Controls /Personal Protection
8.1 Control parameters
8.1.1 Occupational Exposure Limits
SUBSTANCE
CAS No.
LTEL (8 hr TWA ppm)
LTEL (8 hr TWA mg/m³)4
STEL (ppm)m 5
STEL (mg/m³)5
Note
Copper fume (as Cu)
7440-50-8
0.2
Copper and compounds: dust and mists (as Cu)2
7440-50-8
1
2
Manganese and its inorganic compounds (as Mn) - Inhalable fraction3
7439-96-5
0.2
Manganese and its inorganic compounds (as Mn) - Respirable fraction3
7439-96-5
0.05
Region Source United Kingdom UK Workplace Exposure Limits EH40/2005 (Fourth edition, published 2020)
Do not allow high volumes (bulk amounts) of concentrated product to be spilled into drains, sewers, or water courses due to potential harm to aquatic organisms. When product is used/dosed as intended, testing has shown there is no risk to aquatic organisms.
Section 9: Physical and Chemical Properties
9.1 Information on basic physical and chemical properties
Physical state Liquid Colour Dark brown Odour Sweet-smelling Melting point/freezing point Not known Boiling point or initial boiling point and boiling range Not known Flammability Non-flammable Lower and upper explosion limit Not known Flash Point Not known Auto-ignition temperature Not known Decomposition Temperature 100°C pH 3.0-4.0 Kinematic Viscosity Not known Solubility Solubility (Water) : >100g /100g Solubility (Other) : Not known Partition coefficient n-octanol/water (log value) Not known Vapour pressure Not known Density and/or relative density Relative density : 1.110@ 25°C Relative vapour density Not known Particle characteristics Not applicable 9.2 Other information None
Section 10: Stability and Reactivity
10.1 Reactivity Stable under normal condition 10.2 Chemical Stability Contact with strong bases may cause metals to precipitate. 10.3 Possibility of hazardous reactions No hazardous reactions known if used for its intended purpose. 10.4 Conditions to avoid Do not freeze. Avoid overheating. 10.5 Incompatible materials Strongly alkaline. 10.6 Hazardous decomposition products No hazardous decomposition products known.
Section 11: Toxicological Information
11.1 Information on hazard classes as defined in Regulation (EC) No 1272/2008 Acute toxicity - Ingestion Calculation method: Not classified. LD50 >5000mg/kg Effects and Symptoms : May cause nausea/vomiting. Diarrhea, Headache. Acute toxicity - Skin Contact Calculation method: Not classified. LD50 >2000mg/kg Acute toxicity - Inhalation Calculation method: Not classified. Skin corrosion/irritation Calculation method: Not classified. Serious eye damage/irritation Calculation method: Not classified. May cause eye irritation if concentrated solution is applied directly to eyes.
Skin sensitization data Calculation method: Not classified. Respiratory sensitization data Calculation method: Not classified. Germ cell mutagenicity Calculation method: Not classified. Carcinogenicity Calculation method: Not classified. Reproductive toxicity Calculation method: Not classified. Lactation Calculation method: Not classified. STOT - single exposure Calculation method: Not classified. STOT - repeated exposure Calculation method: Not classified. Aspiration hazard Calculation method: Not classified. 11.2 Information on other hazards None anticipated
Section 12: Ecological Information
12.1 Toxicity Toxicity - Aquatic invertebrates Not classified Toxicity - Fish Not classified Toxicity - Algae Not classified. Toxicity - Sediment Compartment Not classified Toxicity - Terrestrial Compartment Not classified 12.2 Persistence and degradability Biodegradation: 95% 12.3 Bioaccumulative potential No information on this formulation 12.4 Mobility in soil Soluble in water. The product is predicted to have high mobility in soil 12.5 Results of PBT and vPvB assessment Not classified as PBT or vPvB. 12.6 Endocrine disrupting properties Does not cause endocrine disruption 12.7 Other adverse effects None anticipated
Section 13: Disposal Considerations
13.1 Waste treatment methods Dispose of wastes in an approved waste disposal facility. Do not allow high volumes (bulk amounts) of concentrated product to be spilled into drains, sewers, or water courses due to potential harm to aquatic organisms. When product is used/dosed as intended, testing has shown there is no risk to aquatic organisms. 13.2 Additional Information Disposal should be in accordance with local, state or national legislation
Section 14: Transport Information
Not classified as hazardous for transport.
14.1 UN number or ID number Not applicable 14.2 UN proper shipping name Not applicable 14.3 Transport hazard class(es) Not applicable 14.4 Packing group Not applicable 14.5 Environmental hazards Not classified as a Marine Pollutant 14.6 Special precautions for users Not known 14.7 Maritime transport in bulk according to IMO instruments Not known
Section 15: Regulatory Information
15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture European Regulations - Authorizations and/or Restrictions On Use Candidate List of Substances of Very High Concern for Authorization Not listed
REACH: Annex XIV list of substances subject to authorization Not listed REACH: Annex XVII Restrictions on the manufacture, placing on the market and use of certain dangerous substances, mixtures and articles Copper (7440-50-8), Zinc (7440-66-6) -Entry 75 Community Rolling Action Plan (CoRAP) Not listed Regulation (EU) N° 2019/1021 of the European Parliament and of the Council on persistent organic pollutants Not listed Regulation (EC) N° 2024/590 on substances that deplete the ozone layer Not listed Regulation (EU) N° 649/2012 of the European Parliament and of the Council concerning the export and import of hazardous chemicals Seveso Directive None known National regulations Not known 15.2 Chemical Safety Assessment A REACH chemical safety assessment has not been carried out.
Section 16: Other Information
The following sections contain revisions or new statements: 1 - 16 LEGEND Acronyms ATE: Acute Toxicity Estimate CAS: Chemical Abstracts Service CLP: Regulation (EC) No 1272/2008 on classification, labelling and packaging of substances and mixtures DNEL: Derived No Effect Level EC: European Community EINECS: European Inventory of Existing Commercial Chemical Substances LTEL: Long term exposure limit PBT: Persistent, Bioaccumulative and Toxic PNEC Predicted No Effect Concentration REACH: Registration, Evaluation, Authorization and Restriction of Chemicals STEL: Short term exposure limit STOT: Specific Target Organ Toxicity vPvB: very Persistent and very Bioaccumulative Key literature references and sources for data used to compile the SDS Regulation (EC) No. 1272/2008 (CLP Training Advice Regular safety training as appropriate Disclaimers Information contained in this publication or as otherwise supplied to Users is believed to be accurate and is given in good faith, but it is for the Users to satisfy themselves of the suitability of the product for their own particular purpose. SciCorp International Corp. gives no warranty as to the fitness of the product for any particular purpose and any implied warranty or condition (statutory or otherwise) is excluded except to the extent that exclusion is prevented by law. SciCorp International Corp accepts no liability for loss or damage (other than that arising from death or personal injury caused by defective product, if proved), resulting from reliance on this information. Freedom under Patents, Copyright and Designs cannot be assumed.